Kenwood Mc 60 Microphone Wiring Diagram

Kenwood MC-60 Microphone Wiring Diagram

The Kenwood MC-60 is a dynamic microphone that was popular in the 1970s and 1980s. It is a cardioid microphone, meaning that it is most sensitive to sounds coming from the front of the microphone. The MC-60 has a frequency response of 50 Hz to 15 kHz, and a sensitivity of -54 dB. It is a good choice for vocals, acoustic guitar, and other instruments. The MC-60 is a wired microphone, and the wiring diagram is relatively simple. The diagram below shows the connections for the MC-60 microphone. The following is a description of the connections in the diagram: *

XLR Connector:

This is the main output connector for the microphone. It is a three-pin connector, and the pins are wired as follows: * Pin 1: Ground * Pin 2: Signal * Pin 3: Hot *

Internal Microphone Cable:

This cable connects the microphone capsule to the XLR connector. It is a shielded cable, and the shield is connected to the ground pin of the XLR connector. *

Power Supply:

The MC-60 microphone requires a power supply of 48 volts phantom power. This power is typically provided by a mixing console or audio interface. The MC-60 is a versatile and reliable microphone that can be used for a variety of applications. With its simple wiring diagram, it is easy to set up and use. ## Kenwood MC-60 Microphone Specifications The following are the specifications for the Kenwood MC-60 microphone: *

Polar Pattern:

Cardioid *

Frequency Response:

50 Hz to 15 kHz *

Sensitivity:

-54 dB *

Impedance:

200 ohms *

Weight:

140 grams *

Dimensions:

170 mm x 45 mm x 55 mm The MC-60 is a good choice for a variety of applications, including vocals, acoustic guitar, and other instruments. It is a reliable and affordable microphone that is easy to use.

Kenwood Mc 60a Communications Microphone Service Manual Schematics Eeprom Repair Info For Electronics Experts